Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Air Filter on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Air filter

See other generations:
Video tutorial

To replace the engine air filter on a sixth-generation Ford Fiesta, open the bonnet and locate the filter box, positioned in the engine bay and connected to the intake duct. After loosening the screws or unclipping the fasteners that secure the cover, lift it just enough to access the filter element.

Remove the old filter and clean the inside of the housing from any dust or dirt residues. Next, insert the new filter, ensuring it fits snugly in the housing all around the perimeter.

Finally, close the filter box cover, tighten the screws or reattach the fastening clips, and check that the intake system is perfectly sealed.


Posted on 3 August 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Ford Fiesta 5
How to Replace the Air Filter on a Ford Fiesta 5
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) The steps to replace the air filter on a Ford Fiesta 5 are straightforward. Start by opening the bonnet and removing the cover of the box containing …
How to replace the air filter of the Ford Fiesta 6
How to replace the air filter of the Ford Fiesta 6
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In the following procedure, we will describe all the steps you need to follow in order to successfully replace the engine air filter of your Ford Fie…
How to Replace the Air Filter on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) .. How to replace the engine air filter on a Ford Fiesta? Follow this guide. Open the car door, pull up.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos