Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Air filter

How to replace the engine air filter on a Ford Fiesta? Follow this guide. Open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard, and lift the front bonnet, securing it. Using a screwdriver, undo the soundproofing panel (where the air filter is located), disconnect the engine air intake hose and the metal clip pin. Remove the panel with the air filter box from the vehicle body, then extract the worn air filter and insert a new one, ensuring it fits snugly around the walls of the box. Finally, reassemble the air box panel and tighten the screws. Close the front bonnet.

Updated on 27 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Air Filter on a Ford Fiesta 5
How to Replace the Air Filter on a Ford Fiesta 5
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) The steps to replace the air filter on a Ford Fiesta 5 are straightforward. Start by opening the bonnet and removing the cover of the box containing …
How to Replace the Air Filter on a Ford Fiesta
How to Replace the Air Filter on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before starting, open the bonnet of your Ford Fiesta. Begin by unscrewing and removing the screws that secure the air filter cover. Once done, unclip…
How to replace the air filter of the Ford Fiesta 6
How to replace the air filter of the Ford Fiesta 6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In the following procedure, we will describe all the steps you need to follow in order to successfully replace the engine air filter of your Ford Fie…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos