Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Ford Fiesta 5

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Air filter

See other generations:
Video tutorial

The steps to replace the air filter on a Ford Fiesta 5 are straightforward. Start by opening the bonnet and removing the cover of the box containing the air filter.

Next, unscrew the screws and nuts, and disconnect the air and fan pipes located near the box, then proceed to open it. Remove the worn filter and clean the housing before inserting the new filter. Complete the replacement by inserting a new filter and closing the box, tightening the 10 mm nuts and screws, and reconnecting the pipes you previously disconnected.


Updated on 13 September 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on the Ford Fiesta 1.4 TDCi
How to Replace the Fuel Filter on the Ford Fiesta 1.4 TDCi
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) The following steps will show you the procedure for removing and replacing the fuel filter on the Ford Fiesta 1.4 TDCi. First, raise the vehicle and …
How to Replace the Fuel Filter of the Ford Fiesta Mk5 1.4 CDTi
How to Replace the Fuel Filter of the Ford Fiesta Mk5 1.4 CDTi
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) This guide shows how to replace the diesel filter of the Ford Fiesta Mk5 1.4 TDCi. The first step is to open the bonnet and remove the air filter cov…
How to Replace the Air Filter on a Ford Fiesta
How to Replace the Air Filter on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Before starting, open the bonnet of your Ford Fiesta. Begin by unscrewing and removing the screws that secure the air filter cover. Once done, unclip…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos