Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter of the Ford Fiesta Mk5 1.4 CDTi

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Diesel fuel filter

This guide shows how to replace the diesel filter of the Ford Fiesta Mk5 1.4 TDCi. The first step is to open the bonnet and remove the air filter cover. At this point, you can access the fuel filter. Remove the protective cover of the filter and disconnect the fuel lines and the electrical connector. Remove the part after unscrewing the retaining screws of the filter. Replace it with a new unit and refit everything in position. Start the vehicle for a few minutes to check proper operation.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter on a Ford Fiesta?
How to Replace the Fuel Filter on a Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial, we will see how to replace the fuel filter on a Ford Fiesta. Use a lift to raise your car; open the fuel tank cap. Now that t…
Replacing the Fuel Filter on Ford Fiesta
Replacing the Fuel Filter on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Replace the fuel filter on a Ford Fiesta. Here’s how to dismantle and replace it. Lift the car with a column lift, locate the fuel filter under the f…
How to Replace the Diesel Filter on a Ford Fiesta?
How to Replace the Diesel Filter on a Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) The diesel filter on the Ford Fiesta is located at the bottom of the engine bay, so to access it, you will need to lift the car using a jack or ramp.…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos