Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Ford Fiesta?

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Fuel filter

See other generations:
Video tutorial

To replace the fuel filter on a Ford Fiesta, switch off the car and lift it at the front and rear on the passenger side using a jack. The filter is located on the passenger side, at the rear of the car: it will be visible next to the tank and can be pulled out from its housing.

To do this, you will need to lever with a screwdriver on the coloured parts, located on either side. Once the connector is removed, allow the petrol in the filter to drain into a container.

Then, the filter can be removed from the other end and replaced with a new one.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Filter on Ford Fiesta
Replacing the Fuel Filter on Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) Replace the fuel filter on a Ford Fiesta. Here’s how to dismantle and replace it. Lift the car with a column lift, locate the fuel filter under the f…
Replacing the Fuel Filter of the Ford Fiesta 1.5 TDCi
Replacing the Fuel Filter of the Ford Fiesta 1.5 TDCi
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Below are the instructions for removing and replacing the fuel filter of the Ford Fiesta 1.5 TDCi. First, open the bonnet of the vehicle and start di…
How to Replace the Fuel Filter on a Ford Fiesta?
How to Replace the Fuel Filter on a Ford Fiesta?
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) .. In this video tutorial, we will see how to replace the fuel filter on a Ford Fiesta. Use a lift to raise your car; open the fuel tank cap... …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos