Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Ford Fiesta 1.3 Duratec

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Fuel filter

In this video tutorial, you will learn how to remove and replace the fuel filter on a Ford Fiesta 1.3 Duratec petrol model, from 2002 to 2008. First, lift the vehicle and locate the fuel filter along with the connecting pipes; place a container under the filter to catch any excess fuel, then disconnect the inlet and outlet pipes to remove the filter. At this point, replace it with the correct new filter and refit it in position; check the condition of the pipes (if they are damaged, they must be replaced) and reassemble everything!

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on the Ford Fiesta 5 1.3 Duratec
How to Replace the Spark Plugs on the Ford Fiesta 5 1.3 Duratec
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial, you will learn how to remove and replace the engine spark plugs on the fifth generation Ford Fiesta with a 1.3 Duratec engine…
Replacing the Fuel Filter on Ford Fiesta
Replacing the Fuel Filter on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Replace the fuel filter on a Ford Fiesta. Here’s how to dismantle and replace it. Lift the car with a column lift, locate the fuel filter under the f…
How to Replace the Fuel Filter on a Ford Fiesta
How to Replace the Fuel Filter on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) When servicing your car, do not forget the fuel filter. Lift the car on a column lift and locate the fuel filter. Disconnect the cables and various h…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos