Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the ECU on the Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Warning light – error code

See other generations:
Video tutorial

In this tutorial, you will see how to reset the ECU on the Ford Fiesta, a very simple and quick operation that can be performed as an attempt to resolve an electronic issue. First, ensure that the key is not inserted, then open the bonnet and, using a 10mm socket, disconnect the negative terminal of the battery by loosening the corresponding nut. Next, connect the positive terminal to the cable just disconnected by bridging them, wait for about 30 minutes, and then reconnect everything.

At this point, start the vehicle and check if the issues are resolved.


Updated on 3 October 2026 by ScegliAuto


Related tutorials

Removing the ECU from a Ford Fiesta
Removing the ECU from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In today's tutorial video, you will learn how to remove the internal ECU from a Ford Fiesta. First, open the bonnet of the car and disconnect the two…
Where is the ECU Located in a Ford Fiesta?
Where is the ECU Located in a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this video, see where the ECU is located in a Ford Fiesta and how to proceed if you need to replace it, for example, in case of a fault. As shown,…
How to reset the Ford Fiesta car radio
How to reset the Ford Fiesta car radio
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Today we will see the instructions that will allow us to reset the Ford Fiesta car radio, in simple and quick steps. There are in fact two methods to…

    Frequently Asked Questions

    • Fiesta 2002-2008 - Why does the Ford Fiesta door open light stay on? Read answer

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos