Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the ECU from a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Control unit

In today's tutorial video, you will learn how to remove the internal ECU from a Ford Fiesta. First, open the bonnet of the car and disconnect the two battery terminals; then, from inside the car, remove the plastic panels located at the bottom and take out the clips to access the ECU. At this point, disconnect the electrical connectors attached to the ECU, taking care with the very thin wires, and remove it. The video also illustrates how to reprogram the ECU using specific software.

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Gear Knob from a Ford Fiesta
How to Remove the Gear Knob from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before starting, sit in the driver's seat of your Ford Fiesta. Begin by gripping the gear knob with both hands. Next, unscrew it from the gear lever.…
Installing the Additional Chip Tuning Performance Control Unit
Installing the Additional Chip Tuning Performance Control Unit
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) For this operation, you need to obtain the control unit kit for the vehicle in question. Remove the connector from the installed control unit using a…
How to Remove the Radiator Fan from a Ford Fiesta
How to Remove the Radiator Fan from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you begin, open the front bonnet of your Ford Fiesta. Start by removing the air filter housing and the associated hoses by unscrewing the resp…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos