Do it yourself
Frequently asked questions about cars and motorcycles

Fuse Box Location and Diagram for BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Fuse box

These brief steps will show you where to find the fuse boxes and how to access their diagram for the BMW 3 Series. First, open the front passenger door and start opening the glove compartment; then remove the plastic cover at the bottom to access the interior fuse box, as shown in the video. You will find another fuse box in the engine compartment by removing the plastic cover located at the top right; the owner's manual contains the fuse diagram, which is useful for replacing the fuses!

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (1990-2001 / E36) In this brief and simple guide, you will see the diagram and location of the fuse box for the BMW 3 Series, following the instructions below. First, …
BMW Serie 3 (1990-2001 / E36) Today's guide shows the diagram and placement of the fuse boxes for the BMW 3 Series in simple steps. First, open the hood of the vehicle and start b…
BMW Serie 3 (1998-2006 / E46) Below are the instructions to access the internal fuse box of the BMW 3 Series, including the layout and diagram. First, get inside the vehicle and o…

Other guides you may be interested in

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the cigarette lighter fuse of the BME 3 Series 318d e90? Read answer
    • Serie 3 1998-2006 - Where is the airbag fuse located on BMW 3 Series E46? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos