Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Third Brake Light Bulb on a BMW 320i F30

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part:

Video tutorial
Detailed instructions - This guide shows how to replace the third brake light bulb on a BMW 320i F30. First, access the rear seat of the vehicle and, using a trim removal tool, remove the third brake light housing. Be careful not to pull too hard on the assembly due to the power cable, and apply pressure on the plastic cover, not on the upholstery, to avoid damage. Disconnect the electrical connector for easier operation. At this point, you can replace the bulb pack and reassemble everything in place. Check the proper functioning of the light.

Updated on 13 June 2026 by ScegliAuto


Related tutorials

BMW Serie 3 (2012-2019 / F30, F31) If you own a BMW 3 Series 320i (2012-2019) and want to replace the front headlight bulb yourself, follow these steps. First, ensure the car is comple…
BMW Serie 3 (2012-2019 / F30, F31) In this video, you will learn how to remove and replace the engine air filter on the BMW 3 Series F30 320i - 330i in simple and quick steps. First, o…
BMW Serie 3 (2012-2019 / F30, F31) In today's tutorial video, you will learn how to remove and replace the low beam and high beam bulbs in the front headlight of a BMW 3 Series F30 and…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Peugeot 508?

To reset the tyre pressure warning light on the Peugeot 508, inflate the tyres until they reach the corresponding pressure value: this value is stated on the sticker attached to the driver’s door pillar. Once the tyres are inflated, proceed to the interior of the vehicle and turn on the instrument panel; if the warning light remains on, start the engine and drive for a few miles until the light turns off.

Watch the video!


by ScegliAuto

More videos