|
Do it yourself
| |||
| ||||
How to Change a Headlight Bulb on a BMW E90
Model: BMW Serie 3
E92, E90, E91
- Years:
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
In this video, you can see how to change a headlight bulb on a BMW E90: first, move the wheel outwards on the side of the bulb you need to change, as you will access the bulb from the wheel well. The video highlights the clips you need to remove to take off the wheel well liner from the inside. This way, you can access the plastic cover that protects the front headlight bulbs, which are secured by two screws at the bottom and two at the top. Once the cover is removed, disconnect the electrical connectors and finally remove the bulb to be replaced. Always remember not to touch the glass of the new bulb with bare hands, as this will reduce its lifespan. After the replacement, put everything back in place.
Updated on 31 October 2026 by ScegliAuto
Related tutorials
BMW Serie 3
(2005-2013 /
E92, E90, E91)
In this video tutorial, you will learn how to replace the headlight bulb on a BMW 3 Series E90. First, lift the vehicle and turn the wheel fully to t…
BMW Serie 3
(2005-2013 /
E92, E90, E91)
In this video, you will learn how to remove and replace the rear headlight bulb on a BMW 3 Series E90. First, open the trunk and remove the side cove…
BMW Serie 3
(2005-2013 /
E92, E90, E91)
In this video, follow the steps to remove and replace the xenon bulb on a BMW 3 Series E90. First, open the hood of your car and disconnect the elect…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.087
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |