Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Low Beam Headlight Bulbs in a BMW 3 Series?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Headlight bulb

In this tutorial, you will learn how to replace the low beam headlight bulbs in a BMW 3 Series, a very simple and quick operation. First, ensure that the key is not in the ignition for safety. Then, open the hood, locate the large cap at the back of the headlight in question, and remove it. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb. Finally, insert the new bulb without touching it directly with your bare hands and reassemble everything by following the reverse procedure.

Posted on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove Fog Light Bulb on BMW 3 Series
Remove Fog Light Bulb on BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Remove the fog light bulbs? Let's see how to remove the fog light bulbs on the BMW 3 Series. Turn the front wheel inward, locate the fender liner cov…
Remove Headlight Bulbs on BMW 3 Series F30
Remove Headlight Bulbs on BMW 3 Series F30
BMW Serie 3 (2012-2019 / F30, F31) Remove the front headlight bulbs? Let's see how to remove the front headlight bulbs on the BMW 3 Series. Turn the front wheel inward, locate the cove…
Where are the fuses located in the BMW 3 Series?
Where are the fuses located in the BMW 3 Series?
BMW Serie 3 (1990-2001 / E36) The fuses in the BMW 3 Series are all contained within the single fuse box installed in the vehicle: in this car model, you can find it inside the en…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos