Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulbs in a BMW Series 3?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Headlight bulb

In this tutorial, we will see how to replace the headlight bulbs in a BMW Series 3, a task that is extremely simple and quick. First, let's make sure that the instrument panel is turned off, so we can work safely. Then, we turn the steering wheel inward towards the side we will be working on. Next, we open the flap located in the front area of the wheel arch, remove the cap, and disconnect the power connector. At this point, we just need to unhook the metal clip, remove the old bulb, insert the replacement, and reassemble everything by following the reverse procedure.

Posted on 24 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change Parking Light on BMW 3 Series
How to Change Parking Light on BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Want to replace the bulbs in the headlights of your BMW 3 Series? Let's see how to remove them from inside the front headlights. First, open the hood…
Remove Headlight Bulbs on BMW 3 Series F30
Remove Headlight Bulbs on BMW 3 Series F30
BMW Serie 3 (2012-2019 / F30, F31) Remove the front headlight bulbs? Let's see how to remove the front headlight bulbs on the BMW 3 Series. Turn the front wheel inward, locate the cove…
Replacing Headlight Bulbs on BMW 3 Series
Replacing Headlight Bulbs on BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Are the headlight bulbs on your BMW 3 Series burnt out? Let's see how to remove them. Open the hood by pulling the lever located at the bottom of the…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos