Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the steering wheel of the BMW Series 3

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Steering wheel

The instructions in this guide will show us how to disassemble and replace the steering wheel and its airbag on the BMW Series 3 in simple steps. First, let's get inside the vehicle and start by removing the airbag from the steering wheel by pushing on the rear holes; then disconnect its electrical connector, as shown in the video. At this point, we unscrew the central screw of the steering wheel, disconnecting the steering wheel control cables to remove it; we replace the steering wheel with the new one, inserting it correctly, connecting the controls, and finally reassembling the airbag.

Posted on 28 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Steering Wheel on the BMW 3 Series
Replacing the Steering Wheel on the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today's guide will show you the steps to remove and replace the steering wheel on the BMW 3 Series, following the instructions below. First, get insi…
How to Remove and Replace the Steering Wheel on BMW 3 Series
How to Remove and Replace the Steering Wheel on BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) This guide will show you how to remove and replace the steering wheel on the BMW 3 Series. First, get inside the cabin and start by removing the airb…
How to Remove the Steering Wheel Frame and Switch Panel on BMW 3 Series
How to Remove the Steering Wheel Frame and Switch Panel on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this brief and simple guide, you will learn how to remove and replace the steering wheel frame and switch panel on the BMW 3 Series. First, get in…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos