Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to disassemble the BMW 3 Series steering wheel trim and button panel

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Steering wheel
Operation: How to disassemble the BMW 3 Series steering wheel trim and button panel

In this short and simple guide we will see how to disassemble and replace the BMW 3 Series steering wheel frame and button panel. First of all, we get on board the car and begin disassembling the steering wheel, first removing the airbag (disconnecting the electrical connector that we find on the back); we then unscrew the central screw to remove our steering wheel. At this point let's unscrew the screws that we find on the back of the steering wheel and inside it (located on the sides), in order to remove the plastic cover and the push-button panel; we carry out the electrical connection of the new push-button panel and put everything back together!


Posted on 28 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos