Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Steering Wheel on the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Steering wheel

Today's guide will show you the steps to remove and replace the steering wheel on the BMW 3 Series, following the instructions below. First, get inside the vehicle and begin by removing the steering wheel airbag, disconnecting the electrical connector located on the back. Next, unscrew the central steering wheel bolt and disconnect the steering wheel controls to remove it, as illustrated in the video. At this point, install the new steering wheel, making all the necessary electrical connections and ensuring it is properly centered!

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble and replace the steering wheel of the BMW Series 3
How to disassemble and replace the steering wheel of the BMW Series 3
BMW Serie 3 (2005-2013 / E91, E90, E92) The instructions in this guide will show us how to disassemble and replace the steering wheel and its airbag on the BMW Series 3 in simple steps. Fir…
How to Remove and Replace the Steering Wheel on BMW 3 Series
How to Remove and Replace the Steering Wheel on BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) This guide will show you how to remove and replace the steering wheel on the BMW 3 Series. First, get inside the cabin and start by removing the airb…
How to Remove the Driver's Side Airbag (Steering Wheel) on a BMW 3 Series
How to Remove the Driver's Side Airbag (Steering Wheel) on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) How to remove the driver's side airbag (steering wheel) on a BMW 3 Series? This operation is very simple if you follow the steps. Let's see in this g…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos