Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel of a BMW 3 Series E90?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Steering wheel

The video here shows how to remove the steering wheel of a BMW 3 Series E90, but the same procedure also applies to other similar models like E91, E92, and even the BMW 1 Series E87. Let's begin. First, you need to extract the airbag module. With one hand, pull the front part of the center cover of the steering wheel, where the airbag is located, while with the other hand, unscrew the screw located at the back of the steering wheel. Remove the airbag module and disconnect the electrical connectors. At this point, just unscrew the central bolt and then grasp the steering wheel and pull it towards you to remove it from its position.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the steering wheel of the BMW E90
How to remove the steering wheel of the BMW E90
BMW Serie 3 (2005-2013 / E91, E90, E92) In this article, we will see how to disassemble the steering wheel of the BMW 3 Series E90, in order to replace it. To carry out this operation, a 16…
How to Remove the Instrument Cluster from the BMW 3 Series 320d E90
How to Remove the Instrument Cluster from the BMW 3 Series 320d E90
BMW Serie 3 (2005-2013 / E91, E90, E92) This guide shows how to remove the instrument cluster from the BMW 3 Series 320d E90. First, lower and fully extend the steering wheel. Next, using a…
Replacing the Steering Wheel on the BMW 3 Series
Replacing the Steering Wheel on the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today's guide will show you the steps to remove and replace the steering wheel on the BMW 3 Series, following the instructions below. First, get insi…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos