|
Do it yourself
| |||
| ||||
How to disassemble the steering wheel of the BMW E90
Model: BMW Serie 3
E92, E90, E91
- Years:
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
In this article, we will see how to disassemble the steering wheel of the BMW 3 Series E90/91/92, a procedure that is useful in case you want to replace the steering wheel because it is damaged or ruined. First of all, it is recommended to disconnect the negative pole of the battery to prevent the airbag from opening unintentionally, after which you must use a flat or cutting screwdriver, using your fingers to locate the protrusion where to insert the screwdriver, once inserted when you feel resistance, push the screwdriver outwards, in this way pressure will be applied to the clip, perform this procedure on both sides, in this way the airbag will be unlocked, once unlocked remove it and disconnect the appropriate connectors, once the connectors are removed completely, at this point disconnect the connector, then remove the steering wheel fixing bolt, at this point it will be possible to remove the steering wheel in order to replace it.
Posted on 22 November 2025 by ScegliAuto
Related tutorials
BMW Serie 3
(2005-2013 /
E92, E90, E91)
In this article, we will see how to disassemble the steering wheel of the BMW 3 Series E90, in order to replace it. To carry out this operation, a 16…
BMW Serie 3
(2005-2013 /
E92, E90, E91)
The video here shows how to remove the steering wheel of a BMW 3 Series E90, but the same procedure also applies to other similar models like E91, E9…
BMW Serie 3
(2005-2013 /
E92, E90, E91)
This guide shows how to remove the driver's airbag from the BMW 320d E90. To disassemble the airbag module from the steering wheel, locate the small …
Other guides you may be interested in
|
How to Remove the Toll Tag Holder from the Car Windscreen
The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.063
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |