Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Driver's Airbag Module from the BMW 3 Series 320d E90

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Airbag

See other generations:
Video tutorial

This guide shows how to remove the driver's airbag from the BMW 320d E90. To disassemble the airbag module from the steering wheel, locate the small recess on the back of the steering wheel and insert a flathead screwdriver to disengage the locking spring.

Push the screwdriver toward the center of the steering wheel and downward, press the airbag lock inward, and then pull it out. After disconnecting the locking spring from the opposite side of the steering wheel, disconnect the connectors of the airbag module before fully removing it. Perform this operation carefully.


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to Replace Glow Plugs and the Glow Plug Module on BMW 3 Series 320d E90
How to Replace Glow Plugs and the Glow Plug Module on BMW 3 Series 320d E90
BMW Serie 3 (2005-2013 / E92, E90, E91) In this video tutorial, learn how to remove and replace the glow plugs and the glow plug module on a BMW 3 Series 320d E90 engine. First, open the ho…
How to Remove the Steering Wheel of a BMW 3 Series E90?
How to Remove the Steering Wheel of a BMW 3 Series E90?
BMW Serie 3 (2005-2013 / E92, E90, E91) The video here shows how to remove the steering wheel of a BMW 3 Series E90, but the same procedure also applies to other similar models like E91, E9…
How to Remove the Instrument Cluster from the BMW 3 Series 320d E90
How to Remove the Instrument Cluster from the BMW 3 Series 320d E90
BMW Serie 3 (2005-2013 / E92, E90, E91) This guide shows how to remove the instrument cluster from the BMW 3 Series 320d E90. First, lower and fully extend the steering wheel. Next, using a…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos