Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster from the BMW 3 Series 320d E90

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Instrument cluster

This guide shows how to remove the instrument cluster from the BMW 3 Series 320d E90. First, lower and fully extend the steering wheel. Next, using a T10 Torx screwdriver, remove the two screws located at the top of the instrument cluster. Pry the top of the cluster to rotate it downward and pull it out slightly; turn it sideways to disconnect the control electrical cables. The connector has a lever that must be fully pressed down for disconnection. At this point, you can remove the instrument cluster.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Glow Plugs and the Glow Plug Module on BMW 3 Series 320d E90
How to Replace Glow Plugs and the Glow Plug Module on BMW 3 Series 320d E90
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video tutorial, learn how to remove and replace the glow plugs and the glow plug module on a BMW 3 Series 320d E90 engine. First, open the ho…
How to Remove the Coolant Hose on BMW 3 Series E46-E90 320d
How to Remove the Coolant Hose on BMW 3 Series E46-E90 320d
BMW Serie 3 (1998-2006 / E46) Today, you will learn how to remove and replace the coolant hose on a BMW 3 Series E46, as well as on the 3 Series 320d E90. First, open the hood of …
How to Replace Glow Plugs in a BMW 3 Series 320d?
How to Replace Glow Plugs in a BMW 3 Series 320d?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video, see how to replace the glow plugs in a BMW 3 Series E90 320d, a very simple and quick operation. First, disconnect the negative termin…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos