Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Instrument Cluster in a BMW 3 Series?

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Instrument cluster

As you can see in this tutorial, replacing the instrument cluster in a BMW 3 Series is a very simple and quick operation. First, ensure that the key is not in the ignition for safety. Next, locate the two screws on the upper inner edge of the cluster and remove them using a T20 Torx wrench. Once this is done, grasp the cluster, pull it towards you, and extract it from the dashboard. At this point, simply disconnect the two internal connectors, connect them to the replacement part, and install it by following the reverse procedure.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster on BMW 3 Series
How to Remove the Instrument Cluster on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) How do you remove the instrument cluster to replace the LEDs in the BMW 3 Series? Let's carefully see in this video how to proceed with the correct d…
How to Replace the Instrument Cluster Lights on a BMW 3 Series
How to Replace the Instrument Cluster Lights on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) This brief guide will show you how to disassemble and replace the bulbs in the instrument cluster of the BMW 3 Series, following the instructions bel…
How do you reset the partial odometer of the BMW 3 Series?
How do you reset the partial odometer of the BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) In order to reset the partial odometer of the BMW 3 Series, you need to turn on the instrument panel by inserting the key into its slot and pressing …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos