Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster on BMW 3 Series

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Instrument cluster

See other generations:
Video tutorial

How do you remove the instrument cluster to replace the LEDs in the BMW 3 Series? Let's carefully see in this video how to proceed with the correct disassembly: Remove the screws on the sides of the instrument cluster using a screwdriver. After disassembly, take out the instrument cluster from the dashboard (disconnect the power cables).

Once the piece is removed from the dashboard, install a new one or (replace the LEDs/bulbs in the cluster) reassemble the same one after the maintenance is done. Finally, proceed to install the instrument cluster following the steps taken earlier.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to disassemble the instrument panel of the BMW 3 Series
How to disassemble the instrument panel of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) The following steps will show us how to disassemble and replace the instrument cluster of the BMW 3 Series dashboard. First, we get into the car and …
How to Remove the Instrument Cluster from a BMW 3 Series
How to Remove the Instrument Cluster from a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) How do you remove the instrument cluster installed in a BMW 3 Series? Follow these steps for proper disassembly: Remove the screws on the sides of th…
How to Remove the Dashboard of the BMW 3 Series
How to Remove the Dashboard of the BMW 3 Series
BMW Serie 3 (1990-2001 / E36) Today's steps will show you how to remove and replace the entire dashboard of the BMW 3 Series, following the instructions below. First, open the fro…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos