Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the dashboard of the BMW 3 Series

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Dashboard

Today's steps will show us how to dismantle and replace the entire dashboard of the BMW 3 Series, following the instructions below. First, we open the front doors and start dismantling and removing the glove compartment and lower plastics, unscrewing all the fixing screws; then we remove the central instrumentation components, dismantling the radio and air conditioning controls, as shown in the video. At this point, we dismantle the instrument panel to subsequently remove the dashboard, applying the reverse process for reassembly!

Posted on 24 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to know the fuse diagram of a BMW 3 Series
How to know the fuse diagram of a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) The fuse box of a BMW 3 Series car can be located inside the vehicle's cabin and contains fuses related to: windshield wiper motor, windshield washer…
How to disassemble the instrument panel of the BMW 3 Series
How to disassemble the instrument panel of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) The following steps will show us how to disassemble and replace the instrument cluster of the BMW 3 Series dashboard. First, we get into the car and …
Removing the Instrument Cluster from the BMW 3 Series
Removing the Instrument Cluster from the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today's step-by-step instructions will show you how to remove and replace the instrument cluster of the BMW 3 Series in simple steps. First, get insi…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos