Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard of a BMW 3 Series?

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Dashboard

Before starting, sit in the front passenger seat of your BMW 3 Series. Begin by inserting the tip of a thin but sturdy tool into the gap between the dashboard and its housing, then slide it along the entire perimeter, prying as you go. This will release the rear securing clips. Once you complete this step, pull the dashboard out enough to reach the rear connector for the turn signals. At this point, disconnect it, and you will have completed the removal.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster from a BMW 3 Series
How to Remove the Instrument Cluster from a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Before you can begin, sit in the driver's seat of your BMW 3 Series. Using a Torx screwdriver, start by unscrewing the screws that secure the instrum…
How to Remove the Dashboard of a BMW 3 Series
How to Remove the Dashboard of a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Before starting, gather a thin but sturdy tool and sit in the front passenger seat of your BMW 3 Series. Begin by inserting the tip of the thin but s…
Remove Air Vents on BMW 3 Series
Remove Air Vents on BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Want to remove the air vents from a BMW 3 Series? Let's see how to take off the air vent. Pry with a plastic trim tool on the sides of the air vent a…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos