Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Driver's Seat Heater Fuses in the BMW 3 Series?

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Seat

See other generations:
Video tutorial

If the driver’s seat heater in your BMW 3 Series suddenly stops working, first check the status of the related fuses, which are located as shown in this video. As demonstrated, there are three fuses located in the fuse box inside the cabin, specifically behind the glove compartment on the passenger side.

They are labeled F10, F46, and F68. If they are blown, make sure to use replacement fuses with equivalent specifications and always work with the vehicle turned off, otherwise, you could damage the connected devices.


Updated on 27 October 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the BMW 3 Series?
Where are the fuses located in the BMW 3 Series?
BMW Serie 3 (1990-2001 / E36) The fuses in the BMW 3 Series are all contained within the single fuse box installed in the vehicle: in this car model, you can find it inside the en…
How to Replace the Cabin Heater Radiator in a BMW 3 Series
How to Replace the Cabin Heater Radiator in a BMW 3 Series
BMW Serie 3 (1990-2001 / E36) Below are the instructions to remove and replace the cabin heater radiator in a BMW 3 Series. First, open the hood of your car and start disconnectin…
Where to Find and How to Access the Fuses in a BMW 3 Series?
Where to Find and How to Access the Fuses in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) The fuses in your BMW 3 Series are located inside the fuse box. The fuse box is behind the glove compartment on the passenger side. To access the fus…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos