Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard of the BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Dashboard

Below are the step-by-step instructions to remove the entire dashboard of the BMW 3 Series. First, get inside the vehicle and start by removing the glove compartment, unscrewing the screws found inside and on the sides. Next, remove the driver’s airbag and the steering wheel by disconnecting the electrical connector and unscrewing the center bolt. At this point, remove the entire center instrumentation, from the radio to the climate control buttons, disconnecting the various wiring harnesses. Finally, remove the dashboard by following the video tutorial until the end!

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Speedometer/Dashboard of BMW 3 Series E36
Removing the Speedometer/Dashboard of BMW 3 Series E36
BMW Serie 3 (1990-2001 / E36) In today's tutorial video, you will learn how to remove the speedometer/dashboard of a BMW 3 Series E36. First, get inside the car and start by unscr…
How to Remove the Dashboard of a BMW 3 Series?
How to Remove the Dashboard of a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) Before starting, sit in the front passenger seat of your BMW 3 Series. Begin by inserting the tip of a thin but sturdy tool into the gap between the …
How to Remove the Dashboard of a BMW 3 Series
How to Remove the Dashboard of a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Before you can start, enter the cabin of your BMW 3 Series. Begin by inserting the tip of a thin but sturdy tool into the gap between the dashboard a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos