Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Dashboard of a BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Dashboard

Before you can start, enter the cabin of your BMW 3 Series. Begin by inserting the tip of a thin but sturdy tool into the gap between the dashboard and its housing, then slide it along the entire perimeter while prying. This will release the rear securing clips. Once you complete this step, proceed to pull the dashboard out enough to reach the rear connector for the turn signal button. Once you reach the connector, disconnect it, and you will have finished the removal.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (1990-2001 / E36) Today's steps will show us how to dismantle and replace the entire dashboard of the BMW 3 Series, following the instructions below. First, we open th…
BMW Serie 3 (1998-2006 / E46) Today's step-by-step instructions will show us how to disassemble and replace the stock radio of the BMW 3 Series. First, we get into the car and sta…
BMW Serie 3 (2005-2013 / E91, E90, E92) Today, in this short and simple guide, you will see the steps to remove the dashboard from the BMW 3 Series. First, get inside the vehicle and start …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos