Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Speedometer/Dashboard of BMW 3 Series E36

Model: BMW Serie 3 E36 - Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Instrument cluster

See other generations:
Video tutorial

In today's tutorial video, you will learn how to remove the speedometer/dashboard of a BMW 3 Series E36. First, get inside the car and start by unscrewing the T25 Torx screws that secure the dashboard; once done, pull the dashboard towards you to extract it. At this point, disconnect the electrical connectors on the back, and you will be able to access the rear bulbs (the video shows the disassembly).

Apply the reverse procedure for reassembling the dashboard!


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Replace the Instrument Cluster on the BMW 3 Series E36?
How to Replace the Instrument Cluster on the BMW 3 Series E36?
BMW Serie 3 (1990-2001 / E36) To replace the instrument cluster on the BMW 3 Series E36, loosen the two Torx screws that are located immediately above the speedometer, on the righ…
How to Replace the Headlight Bulb on a BMW 3 Series E36
How to Replace the Headlight Bulb on a BMW 3 Series E36
BMW Serie 3 (1990-2001 / E36) Before you begin, open the hood of your BMW 3 Series. Start by releasing the clip that secures the inner cover of the burnt-out bulb, then remove the…
How to Remove the Front Door Lock Cylinder on the BMW 3 Series E36
How to Remove the Front Door Lock Cylinder on the BMW 3 Series E36
BMW Serie 3 (1990-2001 / E36) In this video, see how to remove and replace the lock cylinder of the front door on the BMW 3 Series E36, following the instructions below. First, op…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos