Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Glow Plugs in a BMW 3 Series 320d?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Glow plugs

In this video, see how to replace the glow plugs in a BMW 3 Series E90 320d, a very simple and quick operation. First, disconnect the negative terminal of the battery for safety. Next, remove the plastic engine cover and then the entire intake manifold by disconnecting all hoses and unscrewing the corresponding bolts. At this point, apply some penetrating spray on the glow plugs if necessary, and begin unscrewing them with the appropriate 8mm wrench. Once the replacement glow plugs are inserted, tighten them using a torque wrench set to 7 lb-ft.

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Glow Plugs on a BMW 3 Series
How to Replace the Glow Plugs on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Before starting, open the hood of your BMW 3 Series. Begin by removing the upper engine covers, loosening the mounting screws, and then take off the …
How to Replace Glow Plugs and the Glow Plug Module on BMW 3 Series 320d E90
How to Replace Glow Plugs and the Glow Plug Module on BMW 3 Series 320d E90
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video tutorial, learn how to remove and replace the glow plugs and the glow plug module on a BMW 3 Series 320d E90 engine. First, open the ho…
How to Remove the Coolant Hose on BMW 3 Series E46-E90 320d
How to Remove the Coolant Hose on BMW 3 Series E46-E90 320d
BMW Serie 3 (1998-2006 / E46) Today, you will learn how to remove and replace the coolant hose on a BMW 3 Series E46, as well as on the 3 Series 320d E90. First, open the hood of …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos