Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Glow Plugs in the BMW 335d?

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Glow plugs

In this tutorial, you will see how to replace the glow plugs in the BMW 335d, a simple operation that requires good manual skills. First, ensure the engine is completely cold, then open the hood and remove both the cabin air filter box and the plastic plate underneath it. Next, remove the three reinforcement bars, disconnect all indicated connectors and wiring, and take off the engine cover. At this point, just remove the intake manifold, unscrew the glow plugs using the appropriate wrench, install the new parts, and reassemble everything by following the reverse procedure.

Posted on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Glow Plugs and the Glow Plug Module on BMW 3 Series 320d E90
How to Replace Glow Plugs and the Glow Plug Module on BMW 3 Series 320d E90
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video tutorial, learn how to remove and replace the glow plugs and the glow plug module on a BMW 3 Series 320d E90 engine. First, open the ho…
Replacing the Glow Plugs on the BMW 3 Series
Replacing the Glow Plugs on the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Today's main steps will show you how to remove and replace the engine glow plugs on the BMW 3 Series. First, open the hood of the vehicle and start b…
How to Replace Glow Plugs in a BMW 3 Series 320d?
How to Replace Glow Plugs in a BMW 3 Series 320d?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video, see how to replace the glow plugs in a BMW 3 Series E90 320d, a very simple and quick operation. First, disconnect the negative termin…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos