Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a BMW 3 Series

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Air filter

See other generations:
Video tutorial

Today, I will explain how to independently replace the air filter on a BMW 3 Series model E46. Open the hood and remove the fastening elements of the air duct housing. Disconnect the duct housing and loosen the fastening clamps; using a socket wrench, remove the air filter housing.

Remove the air filter housing and disconnect the mass airflow sensor connector. Loosen the screws on the air filter cover using a Phillips screwdriver.

Clean the inside of the box before inserting the filter. After inserting the filter, close the box cover and reinstall the entire box inside the hood.

Reconnect the connector and tighten the locking nut of the box.


Posted on 21 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a BMW 3 Series
How to Replace the Cabin Air Filter in a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before you start, sit in the driver's seat of your BMW 3 Series. First, unscrew and remove the screws that secure the cabin air filter cover. Then, d…
How to Replace the Engine Air Filter on BMW 3 Series
How to Replace the Engine Air Filter on BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) How do you replace the engine air filter on a BMW 3 Series? Follow these steps: Open the car door, pull up the engine hood release lever located at t…
How to Replace the Cabin Air Filter in the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) To replace the cabin air filter in the BMW 3 Series, model F30, follow these simple and quick steps. Get inside the vehicle and sit in the passenger …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos