Do it yourself
| ||||
|
BMW Serie 3 - Video tutorial
Model: BMW Serie 3
E92, E91, E90
- Years 2005-2013 Before starting, we will have to open the front hood of our BMW 3 Series. Let's start by disassembling and removing the upper engine covers, unscrewing the fixing screws, and then also removing the anti-torsion bars below. After that, we will also have to disassemble the air manifold, unscrewing the relative fasteners and disconnecting the relative sleeve. Once this is done, we will have to disconnect the plugs connected to the glow plugs. At this point, we will have to unscrew and remove the glow plugs, to then extract them from the head, and we will have completed the disassembly. To fit the new glow plugs, we will have to follow these instructions in reverse, and the replacement will be finished.
Posted on 6 February 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.014
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |