Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : Replacing the tappet cover gasket

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E90, E92, E91 - Years 2005-2013
Part: Engine head
Operation: Replacing the tappet cover gasket

In order to remove and lift the valve cover, it is first necessary to completely remove (cover and base) the passenger compartment air filter container and the stabilizer bars; continue by releasing the cable duct located right above the tappet cover and then proceed with the disassembly of the spark plugs, unhooking the ignition coil sockets and removing the pipettes; at this point it is possible to unscrew the fixing pins of the cover along the contours and lift it by also pulling away the old gasket; carefully clean the seat of the gaskets both on the cylinder head and under the cover in order to apply the new gasket and proceed backwards for reassembly.


Posted on 26 August 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Serie 3 2012-2019 - What is the right torque for cylinder head bolts on BMW 3 Series? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos