Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace Spark Plugs on a BMW 3 Series?

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Spark plugs

See other generations:
Video tutorial

To replace the spark plugs on a BMW 3 Series, open the hood and loosen the bolts securing the plastic cover on top of the engine compartment. Once this is removed, disconnect all connectors attached to the coil located above the spark plugs.

This will allow you to remove the coil and access the spark plug housing; you can extract the spark plugs using a socket wrench. Insert the new spark plugs into their housings and connect them to the coil.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

BMW Serie 3 (1998-2006 / E46) Lift the hood by pulling the lever inside the cabin. Using a pair of channel lock pliers, wiggle the connection point between the spark plug wires an…
BMW Serie 3 (1990-2001 / E36) This video explains how to replace the spark plugs and their gaskets on a BMW 3 Series. After removing the retaining screws, take off the plastic cov…
BMW Serie 3 (1998-2006 / E46) To replace the spark plugs on a BMW 3 Series, open the hood and remove the housing where the air filter is located, just below the windshield. Once t…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos