Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Valve Cover Gasket Replacement

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Cylinder head

Replacing the gasket is a delicate operation, so it is recommended for experienced individuals. Start by removing all components above the engine to facilitate the removal of the valve cover. Remove the engine covers, the electrical connections for the spark plugs, the spark plugs themselves, the intake hose, the timing chain cover, and everything connected to the cover, carefully setting aside the removed components. At this point, remove all the bolts from the cover and take it off. Replace all the rubber gaskets and install the new gasket, ensuring it adheres properly. Clean the engine head thoroughly where the gasket will adhere. Carefully reassemble the cover and all previously removed components.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Valve Cover Gasket
Replacing Valve Cover Gasket
BMW Serie 3 (1998-2006 / E46) For the vehicle in question, the valve cover gasket consists of two pieces: a central one and the perimeter gasket of the cover itself. Once the gask…
Valve Cover Gasket Replacement
Valve Cover Gasket Replacement
BMW Serie 3 (2005-2013 / E91, E90, E92) To remove and lift the valve cover, first completely disassemble the cabin air filter housing and stabilizer bars; continue by freeing the wiring har…
Valve Cover Gasket Replacement
Valve Cover Gasket Replacement
BMW Serie 3 (1998-2006 / E46) Start by disconnecting the plastic cable pass-through located just below the windshield to remove the cabin air filter and disassemble the supporting…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos