Do it yourself
| ||||
|
BMW Serie 3 - Video tutorial
Model: BMW Serie 3
F31, F30
- Years 2012-2019 In this tutorial we can see how to replace the wastegate valve in the BMW 3 Series. First of all, we wait for the engine to be completely cold, then we open the bonnet and disassemble both the entire filter box and the intake manifold. We then identify the turbine, located in the lower front area of the engine, then release the fixing clip of the relative arm and unscrew the fixing bolts with a Torx T45 key. Once this is done we can disconnect the connector, position the spare part and recompose everything following the reverse procedure.
Posted on 23 April 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.044
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |