Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the EGR Valve on BMW 3 Series

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: EGR valve

See other generations:
Video tutorial

Is there a problem with the EGR valve? Let's look at replacing the valve in our BMW 3 Series. Lift the hood of your car and secure it. Remove the plastic engine cover with a screwdriver, then unscrew the EGR valve mounting bolts.

Disconnect the power connector from the valve, and unscrew the valve using the appropriate screwdriver. Disconnect the battery terminals.

Once you remove the sensor from its housing, compare it with the new part. Install the valve using the appropriate wrench, reconnect the power connector to the EGR. Finally, reinstall the soundproof engine cover.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

Removing EGR Valve on BMW 3 Series E46
Removing EGR Valve on BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video, you will see how to remove the EGR valve from the BMW 3 Series E90. First, open the hood and remove the upper plastic engine cover by …
How to Replace the EGR Valve on the BMW 3 Series?
How to Replace the EGR Valve on the BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the EGR valve on the BMW 3 Series, open the hood to access the components located in the engine compartment: the EGR valve is located righ…
How to Clean the EGR Valve on a BMW 3 Series
How to Clean the EGR Valve on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) To clean the EGR valve on a BMW 3 Series, turn off the engine and wait for it to cool. Open the hood, remove the engine cover, and clear any intake d…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos