Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clean the EGR Valve on a BMW 3 Series

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: EGR valve

See other generations:
Video tutorial

To clean the EGR valve on a BMW 3 Series, turn off the engine and wait for it to cool. Open the hood, remove the engine cover, and clear any intake ducts that obstruct access to the EGR. Disconnect the vacuum hose and loosen the clamp on the hose connected to the valve.

Then, remove the bolts that attach the EGR to the manifold and the exhaust gas duct, and take it out of the engine. Spray a specific EGR and intake cleaning product on the sooty areas and let it sit. Gently remove the deposits with a brush or soft bristle, avoiding damage to the mechanism.

Dry the valve, check that the passage is clear, and reinstall it using gaskets in good condition. Reconnect the hoses and ducts and reinstall the engine cover.


Posted on 2 September 2026 by ScegliAuto


Related tutorials

Removing EGR Valve on BMW 3 Series E46
Removing EGR Valve on BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video, you will see how to remove the EGR valve from the BMW 3 Series E90. First, open the hood and remove the upper plastic engine cover by …
How to Replace the EGR Valve Thermostat on a BMW E90
How to Replace the EGR Valve Thermostat on a BMW E90
BMW Serie 3 (2005-2013 / E92, E90, E91) This guide shows how to replace the EGR valve thermostat on a BMW E90. First, open the hood and remove the engine cover. Next, drain the coolant and …
Replacing the EGR Valve on BMW 3 Series
Replacing the EGR Valve on BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Is there a problem with the EGR valve? Let's look at replacing the valve in our BMW 3 Series. Lift the hood of your car and secure it. Remove the pla…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos