Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to replace the EGR valve thermostat on the BMW E90

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: EGR valve
Operation: How to replace the EGR valve thermostat on the BMW E90

The guide shows you how to replace the BMW E90 EGR valve thermostat. The first step is to open the engine compartment and remove the engine cover. At this point it is necessary to drain the refrigerant fluid and disconnect the battery. At this point it is necessary to disconnect the air duct, remove the radiator fan and the hoses, so as to reveal the valve. At this point it is necessary to remove the valve supply pipe. At this point it is possible to remove the thermostat tube and the EGR fixing bolts. At this point it is possible to clean the water pump. Reassembly of the EGR valve is the same as disassembly but in reverse.


Posted on 7 March 2024 by ScegliAuto

Other guides that may interest you

How to open the Honda Sh 125 saddle when the battery is low

Let's see below how to proceed to raise and unlock the motorcycle seat when the battery is low, also helping us with the video. A square key is supplied with the scooter which is needed to unlock the saddle opening. This plastic key must be inserted into the seat inside the flap on the right side of the body immediately under the ignition switch. Then, open the plastic door and insert the key to unlock the saddle opening where we can find the battery and replace it if necessary.

Watch the video!


by ScegliAuto

More videos