Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the thermostat of the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Thermostat

Today we will discover the instructions that will allow us to disassemble and replace the thermostat of the BMW 3 Series, following the instructions below. First of all, we open the hood and start by removing the plastic engine cover; then we disconnect the coolant pipe and let it drain into a container for about ten minutes, as shown in the video. At this point, we unscrew the thermostat screws, located next to the pulleys, to remove it and replace it with the new original one, finally topping up with the new antifreeze liquid.

Posted on 17 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Remove Thermostat on BMW 3 Series
Remove Thermostat on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Removing a faulty thermostat on a BMW 3 Series? Let's go through the disassembly from inside the engine compartment. Lift the hood and secure it. Rem…
Instructions for Disassembling the Thermostat on BMW 3 Series E90-E91-E92
Instructions for Disassembling the Thermostat on BMW 3 Series E90-E91-E92
BMW Serie 3 (2005-2013 / E91, E90, E92) In today's tutorial video, you will see the main instructions for disassembling and replacing the thermostat on a BMW 3 Series E90-E91-E92. First, op…
How to Replace the Thermostat in a BMW 3 Series?
How to Replace the Thermostat in a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) In this tutorial, you will see how to replace the thermostat in a BMW 3 Series E46. First, remove the plastic engine cover by loosening the 5 screws.…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos