Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : Bmw 3 Series E90-E91-E92 thermostat disassembly instructions

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E92, E91, E90 - Years 2005-2013
Part: Thermostat
Operation: Bmw 3 Series E90-E91-E92 thermostat disassembly instructions

In today's video tutorial we will see the main instructions to be able to disassemble and replace the thermostat of a BMW 3 Series E90-E91-E92. First we open and lift the bonnet and remove the engine protection: then we disconnect the upper tube, remove the sleeve and unscrew the screws of the duct of our thermostat. At this point we access the thermostat, where we are going to unscrew the fixing screws to remove it, as in the video. We just have to reassemble the new thermostat and reassemble all the other previously disassembled components; then check its operation!


Posted on 29 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 2005-2013 - Where is the thermostat of the BMW E90 2005? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos