Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant Thermostat on BMW E46

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Thermostat

In this video tutorial, see how to replace the coolant thermostat on a BMW E46 by following these essential steps: lift the hood and secure it with the prop rod; raise the vehicle with a hydraulic jack and secure it with jack stands; position a container under the engine to collect the fluid and unscrew the coolant drain plug; remove the fasteners from the EGR radiator, then remove the fasteners from the thermostat housing, and tighten the support bracket of the radiator, securing the EGR cooling hose clamp.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Thermostat in a BMW 3 Series?
How to Replace the Thermostat in a BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) In this tutorial, you will see how to replace the thermostat in a BMW 3 Series E46. First, remove the plastic engine cover by loosening the 5 screws.…
Remove Thermostat on BMW 3 Series
Remove Thermostat on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Removing a faulty thermostat on a BMW 3 Series? Let's go through the disassembly from inside the engine compartment. Lift the hood and secure it. Rem…
Thermostat Removal and Replacement
Thermostat Removal and Replacement
BMW Serie 3 (1998-2006 / E46) This video shows how to remove and replace the thermostat. First, locate the thermostat housing. Once identified, you can begin its removal and repla…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos