Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Lower Radiator Hose on a BMW 3 Series E46

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the lower radiator hose or coolant hose on a BMW 3 Series E46 (325 Xi). First, open the hood and remove the upper engine cover and the intake duct; then disconnect the electrical connector from the thermostat and remove the fan. At this point, lift the vehicle to access the lower fluid hose; disconnect it and let all the old antifreeze drain out. Finally, replace the hose and reassemble everything!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Replace the Radiator Hose on a BMW 3 Series 2.0L
How to Replace the Radiator Hose on a BMW 3 Series 2.0L
BMW Serie 3 (1998-2006 / E46) This guide provides step-by-step instructions on how to remove and replace the radiator hose on a BMW 3 Series 2.0L. First, open the hood and remove …
How to Remove the Radiator Hose from a BMW 3 Series?
How to Remove the Radiator Hose from a BMW 3 Series?
BMW Serie 3 (2012-2019 / F31, F30) Hello, today you will remove the radiator hose from your BMW 3 Series. Start by opening the front hood. Next, locate the hose, which is the pipe conn…
Where is the coolant temperature sensor located in the BMW 3 Series?
Where is the coolant temperature sensor located in the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) In this video, you can see where the coolant sensor is located in the BMW 3 Series E46, useful if you need to replace it. As shown, the sensor is pos…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos