Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the oil radiator of the BMW 3 Series 328i

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Radiator

Today we will discover the instructions that will allow us to disassemble and replace the oil radiator of the BMW 3 Series 328i. First of all, lift the vehicle and start draining the oil by unscrewing the drain plug; also drain the coolant by disconnecting the pipe, as shown in the video. At this point, remove the oil filter, unscrew the radiator screws and disconnect its pipe to remove it as well; replace the radiator with the new one, installing the original one, applying the reverse process!

Posted on 6 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the oil radiator gasket of the BMW 3 Series
How to replace the oil radiator gasket of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) The instructions in this guide will show us how to disassemble and replace the gasket of the oil radiator of the BMW 3 Series. First, we open the hoo…
Replacement of the windshield washer pump of the BMW 3 Series 328I
Replacement of the windshield washer pump of the BMW 3 Series 328I
BMW Serie 3 (1998-2006 / E46) The following steps will allow us to disassemble and replace the windshield washer pump of the BMW 3 Series 328I. First, we open the hood of the car …
Replacement of the timing chain of the BMW 3 Series 2.0 328i.
Replacement of the timing chain of the BMW 3 Series 2.0 328i.
BMW Serie 3 (2012-2019 / F30, F31) Once a certain mileage is reached, it is necessary to replace the timing chain; let's see the procedure on the BMW 3 Series 2.0 328i. First of all, w…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos