Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front coolant pipe of the BMW 3 Series 328i.

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

In a few simple steps, we will see how to disassemble and replace the front coolant tube of the BMW 3 Series 328i engine. First, open the hood of the car and start unscrewing the screws of the coolant tank; then disconnect the fluid tube, gently removing the metal clamp, as shown in the video.

At this point, disconnect the small electrical connector, replacing the tubing with the new one (as well as the original one); reassemble everything and top up with new antifreeze if necessary!


Posted on 5 February 2025 by ScegliAuto


Related tutorials

Replacement of the windshield washer pump of the BMW 3 Series 328I
Replacement of the windshield washer pump of the BMW 3 Series 328I
BMW Serie 3 (1998-2006 / E46) The following steps will allow us to disassemble and replace the windshield washer pump of the BMW 3 Series 328I. First, we open the hood of the car …
How to replace the oil radiator of the BMW 3 Series 328i
How to replace the oil radiator of the BMW 3 Series 328i
BMW Serie 3 (2012-2019 / F31, F30) Today we will discover the instructions that will allow us to disassemble and replace the oil radiator of the BMW 3 Series 328i. First of all, lift t…
Replacement of the connecting rod and bearings of the BMW 3 Series 328i.
Replacement of the connecting rod and bearings of the BMW 3 Series 328i.
BMW Serie 3 (2012-2019 / F31, F30) In this guide, we will see the main instructions on how to replace the defective connecting rod and their bearings of the crank mechanism of the BMW …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos