Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Washer Pump on a BMW 3 Series

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Pump

Below are the instructions needed to disassemble and replace the windshield washer pump on the BMW 3 Series. First, raise the vehicle and begin by removing the right front wheel; then unscrew all the screws from the front wheel well, removing it to access the washer pump, as shown in the video. At this point, disconnect the pump's hose and the electrical connector, removing it and replacing it with the new original one; connect the pump and refill with the new washer fluid, checking its operation!

Posted on 30 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Windshield Washer Pump on a BMW 3 Series
How to Replace the Windshield Washer Pump on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, you will learn the procedure to remove and replace the windshield washer pump on a BMW 3 Series in simple steps. First, open the hood …
How to know the fuse diagram of a BMW 3 Series
How to know the fuse diagram of a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) The fuse box of a BMW 3 Series car can be located inside the vehicle's cabin and contains fuses related to: windshield wiper motor, windshield washer…
Replacement of the windshield washer pump of the BMW 3 Series
Replacement of the windshield washer pump of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) These short and simple steps will show us how to dismantle and replace the windshield washer pump of the BMW 3 Series. First, lift the vehicle and st…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos