Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : Removing the EGR valve BMW 3 Series E46

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E46 - Years 1998-2006
Part: EGR valve
Operation: Removing the EGR valve BMW 3 Series E46

In this video we are going to see how to remove the EGR valve of the BMW 3 Series E90. First we go to open the engine hood and remove the upper plastic protection of the engine by unscrewing the five screws: with a torx wrench we remove the bracket located in the EGR valve (located in the mouth of the intake manifolds). Let's proceed with the disassembly of the valve going to unclip the intake manifolds with something thin and pointed: now unscrew the four screws with a 10 mm wrench: finally, let's totally unscrew the clamp to remove the fateful EGR valve!


Posted on 7 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos