Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Lock Actuator on BMW 3 Series E90 - Z3

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Door lock

In this video tutorial, you will learn how to remove the front door actuator on the BMW 3 Series E90, as well as on the BMW E60 and Z3. First, open the front door and start by removing the door panel, taking off the center cover and unscrewing the mounting screws located underneath; then pry on the sides of the panel to remove it, as shown in the video. At this point, disconnect the various electrical cables, including the lock cable; use a Torx wrench to unscrew the actuator screw and remove it, following the video until the end!

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Lock of the BMW 3 Series
How to Remove the Rear Door Lock of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Below are the instructions to remove and replace the rear door lock of the BMW 3 Series. First, open the rear door and start removing the door panel …
How to Open a Stuck Trunk in the BMW 3 Series?
How to Open a Stuck Trunk in the BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In the BMW 3 Series, it can happen that the trunk gets stuck, for example, due to a failure of the lock actuator or the related release button. In th…
How to Replace the Hood Lock on a BMW 3 Series E90
How to Replace the Hood Lock on a BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) This guide provides instructions for removing and replacing the hood lock on a BMW 3 Series E90. To remove the lock, you need to take off the front b…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos