Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Lock of the BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Door lock

See other generations:
Video tutorial

Below are the instructions to remove and replace the rear door lock of the BMW 3 Series. First, open the rear door and start removing the door panel by taking off the various covers and unscrewing all the screws securing the panel; finally, disconnect the electrical connector of the window switch, as shown in the video.

At this point, unscrew the screws securing the lock, disconnecting the cable to remove it from the door; then replace the actuator with the new one, applying the reverse procedure!


Updated on 20 August 2026 by ScegliAuto


Related tutorials

How to Open the Door of a BMW 3 Series with the Key
How to Open the Door of a BMW 3 Series with the Key
BMW Serie 3 (1998-2006 / E46) How do you open the door of your car with the metal key from the remote on a BMW 3 Series? Take your remote and press the button to extend the metal …
How to Remove the Rear Outer Handle of the BMW 3 Series?
How to Remove the Rear Outer Handle of the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) To remove the outer door handle of the BMW 3 Series, open the door and move the side seal to access the circular cap near the handle. By removing thi…
How to Remove the Front Door Lock Cylinder on the BMW 3 Series E36
How to Remove the Front Door Lock Cylinder on the BMW 3 Series E36
BMW Serie 3 (1990-2001 / E36) In this video, see how to remove and replace the lock cylinder of the front door on the BMW 3 Series E36, following the instructions below. First, op…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos