Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Window Switch of the BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Window switch

See other generations:
Video tutorial

Today, we will see in this video tutorial how to remove and replace the rear window switch of the BMW 3 Series E90 in simple and quick steps. First, open the front door and start by removing the plastic cover located under the handle; use a thin tool to pry it off the sides, as shown in the video.

Next, disconnect the window switch from the electrical connector located underneath; then replace it with the new one, applying the reverse procedure of disassembly!


Updated on 8 May 2026 by ScegliAuto


Related tutorials

Replacement of the rear window regulator mechanism of the BMW 3 Series.
Replacement of the rear window regulator mechanism of the BMW 3 Series.
BMW Serie 3 (2005-2013 / E92, E90, E91) The following steps will show us how to disassemble and replace the rear window regulator mechanism of the BMW 3 Series. First, we open the rear door…
Removing the Rear Side Window of the BMW 3 Series
Removing the Rear Side Window of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) This guide briefly outlines the steps necessary to remove and replace the rear side window of the BMW 3 Series. First, open the rear door and begin r…
How to deactivate the passenger airbag in the BMW 3 Series?
How to deactivate the passenger airbag in the BMW 3 Series?
BMW Serie 3 (2012-2019 / F31, F30) In this tutorial we can see how to deactivate the passenger airbag in the BMW 3 Series, an extremely simple and quick operation, to be carried out ne…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos